Toshiba Tosvert EtherNet/IP - Modbus TCP option IPE002Z Uživatelský manuál stáhnout pdf (Strana 51)

E6581741

- 50 -

■Examples of Instance 101/151

Access the inverter parameter is enabled using byte 4 to 6 of this Instance.

Set the communication number of the parameter to byte 4, 5 (Index), and the value to byte 6, 7 (Data).

c Read the parameter cmod (Command mode selection, communication number is 0003).

Instance Byte 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 Hex.

5, 4 0 0 00000000000 0 1 1 0x0003

Output Instance 101

7, 6 - - ----------- - - - -

Input Instance 151 5, 4 0 0 00000000000 0 1 1 0x0003

(cmod is 0.) 7, 6 0 0 00000000000 0 0 0 0x0000

d Read the parameter f268 (Initial value of UP/DOWN frequency).

Instance Byte 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 Hex.

5, 4 0 0 00001 00110 1 0 0 0 0x0268

Output Instance 101

7, 6 - - ----------- - - - -

Input Instance 151 5, 4 0 0 00001 00 110 1 0 0 0 0x0268

(f268 is 60.0Hz.) 7, 6 0 0 0 1 0 1110 1110 0 0 0 0x1770

3 Write “60 (Hz)” to the parameter sr1 (Preset speed 1, communication number is 0018).

Instance Byte 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 Hex.

5, 4 1 0 00000000011 0 0 0 0x8018

Output Instance 101

7, 6 0 0 0 1 0 1110 1110 0 0 0 0x1770

5, 4 1 0 00000000011 0 0 0 0x8018

Input Instance 151 (OK)

7, 6 0 0 0 1 0 1110 1110 0 0 0 0x1770

Input Instance 151 (NG) 5, 4 1 1 00000000011 0 0 0 0xC018

(Error code *) 7, 6 0 0 0 1 0001 0 0 0 0 0 0 0 0 0x1100

*Data of "Error code"

0x1100: Data out of range

0x1101: Bad address

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 88 89

Žádné komentáře

Toshiba Tosvert EtherNet/IP - Modbus TCP option IPE002Z Uživatelský manuál Strana 51