Toshiba ICC Multiprotocol Ethernet Interface ASD-G9ETH Uživatelský manuál stáhnout pdf (Strana 19)

ICC

EIP Network Status / Profinet IO Connection Status: When the multi-

protocol firmware image (with Ethernet/IP support) is loaded, this LED conforms

to the prescribed “network status LED” behavior as dictated in the Ethernet/IP

specification, Volume 2, Chapter 9. When the Profinet IO firmware image is

loaded, this LED is on solid green when the controller has established a link

with the interface board and is communicating with it.

Ethernet Activity:

Blinks green briefly when network packets are sent or

received.

Heartbeat:

Blinks green to indicate communication between the interface card

and the drive. Contact ICC technical support if a blinking red error code is

observed.

6.2 Ethernet Jack

The Ethernet jack also contains two embedded LEDs.

Reserved

Ethernet Link

Ethernet Link:

This amber LED is lit whenever a viable Ethernet network is

connected to the port.

Reserved:

This green LED is currently unused and is therefore always OFF.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 99 100

Žádné komentáře

Toshiba ICC Multiprotocol Ethernet Interface ASD-G9ETH Uživatelský manuál Strana 19