Toshiba Qosmio Personal Computer X500 Uživatelský manuál stáhnout pdf (Strana 65)

2 Troubleshooting Procedures

Qosmio X500

Maintenance Manual (960-Q08) 

Procedure 3 Format Check

The computer’s HDD is formatted using the Free-DOS FORMAT program or the physical

format program of the test program. To format the HDD, start with Check 1 below and

perform the other steps as required.

Refer to the Free-DOS Manual for the operation of Free-DOS. For the format by the test

program, refer to the Chapter 3.

Check 1 Format an 2.5” HDD using Free-DOS FORMAT command. Type as FORMAT

C:/S/U.

If 2.5” HDD can not be formatted, perform Check 2.

Check 2 Using the Free -DOS FDISK command, set the 2.5” HDD partition. If the

partition is not set, go to Check 3. If it is set, format 2.5” HDD using Free-DOS

FORMAT command.

Check 3 Using the Diagnostic Disk, format 2.5” HDD with a format option (physical

format). If HDD is formatted, set the 2.5” HDD partition using Free-DOS FDISK

command.

If you cannot format 2.5” HDD using the Tests and Diagnostic program, go to

Procedure 4.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 276 277

Žádné komentáře

Toshiba Qosmio Personal Computer X500 Uživatelský manuál Strana 65